/** @file

  Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
  SPDX-License-Identifier: BSD-2-Clause-Patent

**/

#ifndef _EDKII_NVME_PASS_THRU_PPI_H_
#define _EDKII_NVME_PASS_THRU_PPI_H_

#include <Protocol/DevicePath.h>
#include <Protocol/NvmExpressPassthru.h>

///
/// Global ID for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
///
#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_GUID \
  { \
    0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } \
  }

//
// Forward declaration for the EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI.
//
typedef struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI;

//
// Revision The revision to which the Nvme Pass Thru PPI interface adheres.
//          All future revisions must be backwards compatible.
//          If a future version is not back wards compatible it is not the same GUID.
//
#define EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI_REVISION  0x00010000

/**
  Gets the device path information of the underlying NVM Express host controller.

  @param[in]  This                 The PPI instance pointer.
  @param[out] DevicePathLength     The length of the device path in bytes specified
                                   by DevicePath.
  @param[out] DevicePath           The device path of the underlying NVM Express
                                   host controller.
                                   This field re-uses EFI Device Path Protocol as
                                   defined by Section 10.2 EFI Device Path Protocol
                                   of UEFI 2.7 Specification.

  @retval EFI_SUCCESS              The operation succeeds.
  @retval EFI_INVALID_PARAMETER    DevicePathLength or DevicePath is NULL.
  @retval EFI_OUT_OF_RESOURCES     The operation fails due to lack of resources.

**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH)(
  IN  EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
  OUT UINTN                                 *DevicePathLength,
  OUT EFI_DEVICE_PATH_PROTOCOL              **DevicePath
  );

/**
  Used to retrieve the next namespace ID for this NVM Express controller.

  If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first
  valid namespace ID defined on the NVM Express controller is returned in the
  location pointed to by NamespaceId and a status of EFI_SUCCESS is returned.

  If on input the value pointed to by NamespaceId is an invalid namespace ID
  other than 0xFFFFFFFF, then EFI_INVALID_PARAMETER is returned.

  If on input the value pointed to by NamespaceId is a valid namespace ID, then
  the next valid namespace ID on the NVM Express controller is returned in the
  location pointed to by NamespaceId, and EFI_SUCCESS is returned.

  If the value pointed to by NamespaceId is the namespace ID of the last
  namespace on the NVM Express controller, then EFI_NOT_FOUND is returned.

  @param[in]     This              The PPI instance pointer.
  @param[in,out] NamespaceId       On input, a pointer to a legal NamespaceId
                                   for an NVM Express namespace present on the
                                   NVM Express controller. On output, a pointer
                                   to the next NamespaceId of an NVM Express
                                   namespace on an NVM Express controller. An
                                   input value of 0xFFFFFFFF retrieves the
                                   first NamespaceId for an NVM Express
                                   namespace present on an NVM Express
                                   controller.

  @retval EFI_SUCCESS            The Namespace ID of the next Namespace was
                                 returned.
  @retval EFI_NOT_FOUND          There are no more namespaces defined on this
                                 controller.
  @retval EFI_INVALID_PARAMETER  NamespaceId is an invalid value other than
                                 0xFFFFFFFF.

**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE)(
  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI   *This,
  IN OUT UINT32                                *NamespaceId
  );

/**
  Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function only
  supports blocking execution of the command.

  @param[in] This                  The PPI instance pointer.
  @param[in] NamespaceId           Is a 32 bit Namespace ID to which the Nvm Express command packet will
                                   be sent.
                                   A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in
                                   the namespace ID specifies that the command packet should be sent to all
                                   valid namespaces.
  @param[in,out] Packet            A pointer to the EDKII PEI NVM Express PassThru Command Packet to send
                                   to the NVMe namespace specified by NamespaceId.

  @retval EFI_SUCCESS              The EDKII PEI NVM Express Command Packet was sent by the host.
                                   TransferLength bytes were transferred to, or from DataBuffer.
  @retval EFI_NOT_READY            The EDKII PEI NVM Express Command Packet could not be sent because
                                   the controller is not ready. The caller may retry again later.
  @retval EFI_DEVICE_ERROR         A device error occurred while attempting to send the EDKII PEI NVM
                                   Express Command Packet.
  @retval EFI_INVALID_PARAMETER    Namespace, or the contents of EDKII_PEI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET
                                   are invalid.
                                   The EDKII PEI NVM Express Command Packet was not sent, so no
                                   additional status information is available.
  @retval EFI_UNSUPPORTED          The command described by the EDKII PEI NVM Express Command Packet
                                   is not supported by the host adapter.
                                   The EDKII PEI NVM Express Command Packet was not sent, so no
                                   additional status information is available.
  @retval EFI_TIMEOUT              A timeout occurred while waiting for the EDKII PEI NVM Express Command
                                   Packet to execute.

**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_NVME_PASS_THRU_PASSTHRU)(
  IN     EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI               *This,
  IN     UINT32                                            NamespaceId,
  IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET          *Packet
  );

//
// This PPI contains a set of services to send commands
// to a mass storage device.
//
struct _EDKII_PEI_NVM_EXPRESS_PASS_THRU_PPI {
  UINT64                                         Revision;
  EFI_NVM_EXPRESS_PASS_THRU_MODE                 *Mode;
  EDKII_PEI_NVME_PASS_THRU_GET_DEVICE_PATH       GetDevicePath;
  EDKII_PEI_NVME_PASS_THRU_GET_NEXT_NAMESPACE    GetNextNameSpace;
  EDKII_PEI_NVME_PASS_THRU_PASSTHRU              PassThru;
};

extern EFI_GUID  gEdkiiPeiNvmExpressPassThruPpiGuid;

#endif